Lift Kits

Specs:

Front Lift Height	6.5"
Rear Lift Height	5"
Material	Steel
Front Lift Method	Replacement Strut
Rear Lift Method	Cast Blocks
Lift Type	Lift Kit
Wheel Size	20 x 9
Back Spacing	5-5.75"
Max Tire Size	35 x 12.5
Wheel Size 2	18 x 9
Back Spacing 2	5"-5.25"
Max Tire Size 2	35 x 12.5
Wheel Size 3	17 x 9
Back Spacing 3	5"
Max Tire Size 3	35 x 12.5
Finish	Powdercoat
Metal Cutting Required	Yes
Accommodates Factory Wheels	See Notes
Welding Required	Yes

 

Features:

Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
FMVSS No.126 compliant to work with your vehicle's stability & traction control systems without lighting up your dash like a Christmas tree.
High-strength, 1/4" steel construction crossmembers and ductile iron steering knuckles to optimize operating angles.
Nitro series full length gas struts improve ride quality and offroad damping.
Multi-point differential relocation brackets and heavy duty skid plate improve CV operating angles and offer added protection
Kits are proudly made in the USA.

Notes:

Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2018. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum.<br>Is your truck a crew cab? Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance.<br>Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference.<br>Fitment: All wheel drive models may require front CV driveshaft. See installation instructions for more information.<br>Fitment: Will NOT fit models equipped with MagneRide magnetic ride control.<br>Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing.<br>Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing

 

Specs:

Front Lift Height	6.5"
Rear Lift Height	5"
Material	Steel
Front Lift Method	Replacement Strut
Rear Lift Method	Cast Blocks
Lift Type	Lift Kit
Wheel Size	20 x 9
Back Spacing	5-5.75"
Max Tire Size	35 x 12.5
Wheel Size 2	18 x 9
Back Spacing 2	5"-5.25"
Max Tire Size 2	35 x 12.5
Wheel Size 3	17 x 9
Back Spacing 3	5"
Max Tire Size 3	35 x 12.5
Finish	Powdercoat
Metal Cutting Required	Yes
Accommodates Factory Wheels	See Notes
Welding Required	Yes

 

Features:

Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
FMVSS No.126 compliant to work with your vehicle's stability & traction control systems without lighting up your dash like a Christmas tree.
High-strength, 1/4" steel construction crossmembers and ductile iron steering knuckles to optimize operating angles.
Nitro series full length gas struts improve ride quality and offroad damping.
Multi-point differential relocation brackets and heavy duty skid plate improve CV operating angles and offer added protection
Kits are proudly made in the USA.

Notes:

Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2018. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum.<br>Is your truck a crew cab? Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance.<br>Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference.<br>Fitment: All wheel drive models may require front CV driveshaft. See installation instructions for more information.<br>Fitment: Will NOT fit models equipped with MagneRide magnetic ride control.<br>Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing.<br>Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing

 

Part #44-3471

• Fits 2014-UP GM 1500 trucks with OE Cast Iron front suspension
• Allows for up to a 35" tall off road tire
• Requires at least a 9 inch wide wheel with -12 offset
• Retains factory turning radius, ride and handling
• Works with Front MagneRide
• Includes premium Bilstein shocks

ReadyLIFT® is excited to now offer a brand new 7 inch big lift kit for 2014-2018 Chevy Silverado and GMC Sierra 1500 trucks. This new lift system will work with trucks equipped with or without MagneRide. The new 44-3471 7 inch lift kit is designed for use on 2014-2018 GM 1500 trucks equipped with the factory Cast Steel front suspension.  Some of the great features our new 7 inch lift kit includes retaining the factory turning radius while minimizing track width increase to less than 0.5" per side. This kit will allow for up to a 35" tall tire on a 9 inch wide wheel with -12 offset. Our new "clam-shell" style lower strut extension retains use of the factory struts (both standard and front MagneRide) and does not require strut rotation. These new clam-shell brackets utilizes our TCT lower bushings to provide a precise pivot point that maintains the factory ride.
Boxed steel front/rear cross members and full width front skid plate are constructed of thick 3/16" plate steel while also allowing for use of the OE front plastic gravel guard to protect the engine bay and retain the proper air flow as intended by the GM designers. New 1/4-inch boxed plate steel differential drop brackets feature a double gusset and boxed center rib to take the abuse of front differential torsional twisting. (Not for use on AWD applications - 2WD or 4WD only).
Rear lift is achieved with fabricated 3/16-inch thick plate steel rear lift blocks that include built-in bump stop landings and an offset pin design to properly center the axle and specific angles to the blocks to retain the proper pinion angle. This new lift system includes premium extended length Bilstein rear shocks.
Notes:
Fits up to a 35 tall off road tire - requires a 9 inch wide wheel with -12 offset for no rub (tire tread varies - some aggressive tires may require minor trimming.
Not for use on AWD applications
Includes ReadyLIFT ReadyGuard Powertrain Warranty
Not recommended for GMC Denali 1500 with REAR MagneRide or other models with Rear MagneRide. Only Front MagneRide compatible.

Part #44-3471

• Fits 2014-UP GM 1500 trucks with OE Cast Iron front suspension
• Allows for up to a 35" tall off road tire
• Requires at least a 9 inch wide wheel with -12 offset
• Retains factory turning radius, ride and handling
• Works with Front MagneRide
• Includes premium Bilstein shocks

ReadyLIFT® is excited to now offer a brand new 7 inch big lift kit for 2014-2018 Chevy Silverado and GMC Sierra 1500 trucks. This new lift system will work with trucks equipped with or without MagneRide. The new 44-3471 7 inch lift kit is designed for use on 2014-2018 GM 1500 trucks equipped with the factory Cast Steel front suspension.  Some of the great features our new 7 inch lift kit includes retaining the factory turning radius while minimizing track width increase to less than 0.5" per side. This kit will allow for up to a 35" tall tire on a 9 inch wide wheel with -12 offset. Our new "clam-shell" style lower strut extension retains use of the factory struts (both standard and front MagneRide) and does not require strut rotation. These new clam-shell brackets utilizes our TCT lower bushings to provide a precise pivot point that maintains the factory ride.
Boxed steel front/rear cross members and full width front skid plate are constructed of thick 3/16" plate steel while also allowing for use of the OE front plastic gravel guard to protect the engine bay and retain the proper air flow as intended by the GM designers. New 1/4-inch boxed plate steel differential drop brackets feature a double gusset and boxed center rib to take the abuse of front differential torsional twisting. (Not for use on AWD applications - 2WD or 4WD only).
Rear lift is achieved with fabricated 3/16-inch thick plate steel rear lift blocks that include built-in bump stop landings and an offset pin design to properly center the axle and specific angles to the blocks to retain the proper pinion angle. This new lift system includes premium extended length Bilstein rear shocks.
Notes:
Fits up to a 35 tall off road tire - requires a 9 inch wide wheel with -12 offset for no rub (tire tread varies - some aggressive tires may require minor trimming.
Not for use on AWD applications
Includes ReadyLIFT ReadyGuard Powertrain Warranty
Not recommended for GMC Denali 1500 with REAR MagneRide or other models with Rear MagneRide. Only Front MagneRide compatible.

 Part #210-P0960

• 07-18 Chevy Silverado 1500 & 07-18 GMC Sierra 1500
• 6-inch Front Lift Components
• SM Series Ball Joint Upper Control Arms
• 4-inch block and U-bolt kit
• Fox 2.0 Performance Series IFP coilovers and rear shocks
• Maintains Adequate Droop Travel for Superior Ride Quality
• Levels vehicle front to rear
• Allows for up to a 33x12.5 Tire on a 10-Inch Wide Wheel with 4.75-Inch Backspacing
• 11-hour DIY install time
• Made in the USA
• Free Shipping!

We have bundled everything you need in a lift kit for your Silverado/Sierra 1500 2WD/4WD with high quality Cognito components. There is no guesswork. Cognito components are engineered, manufactured, and assembled in the USA.

The Cognito Front Lift kit is designed and engineered to offer superior ride quality and corrected CV joint angles.

The Cognito Ball Joint SM Series Upper Control Arms add style, function, and performance to your vehicle by correcting the Ball Joint angle for lifted and leveled applications and improving the allowable droop travel for a better ride quality.

The control arm kit features boxed sheet metal arms that are CNC robot welded and powder coated semi-gloss black. Ball joints are included as well as new crush sleeves and polyurethane bushings.

The Fox 2.0 Performance Series shocks contain the latest in shock technology to transform the performance of your truck. The Fox 2.0 Performance Series IFP front shocks are rust resistant and have a metal impact extruded aluminum body to increase cooling capacity.

The IFP eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving. They are easy to install and provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions.

The Cognito 4-inch Block and U-Bolt Kit includes 4-inch tall powder coated semi-gloss black cast steel blocks and heavy-duty zinc plated U-bolts.

 Part #210-P0965

Features:

• 6-inch Front Lift Components
• SM Series Ball Joint Upper Control Arms
• 4-inch block and U-bolt kit
• Fox 2.0 Performance Series IFP coilovers and rear shocks
• Maintains Adequate Droop Travel for Superior Ride Quality
• Levels vehicle front to rear
• Allows for up to a 33x12.5 Tire on a 10-Inch Wide Wheel with 4.75-Inch Backspacing
• 11-hour DIY install time
• Made in the USA
• Free Shipping!

We have bundled everything you need in a lift kit for your Silverado/Sierra 1500 2WD/4WD with high quality Cognito components. There is no guesswork. Cognito components are engineered, manufactured, and assembled in the USA.

The Cognito Front Lift kit is designed and engineered to offer superior ride quality and corrected CV joint angles.

The Cognito Ball Joint SM Series Upper Control Arms add style, function, and performance to your vehicle by correcting the Ball Joint angle for lifted and leveled applications and improving the allowable droop travel for a better ride quality.

The control arm kit features boxed sheet metal arms that are CNC robot welded and powder coated semi-gloss black. Ball joints are included as well as new crush sleeves and polyurethane bushings.

The Fox 2.0 Performance Series shocks contain the latest in shock technology to transform the performance of your truck. The Fox 2.0 Performance Series IFP front shocks are rust resistant and have a metal impact extruded aluminum body to increase cooling capacity.

The IFP eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving. They are easy to install and provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions.

The Cognito 4-inch Block and U-Bolt Kit includes 4-inch tall powder coated semi-gloss black cast steel blocks and heavy-duty zinc plated U-bolts.

• Yields 3 inches of front lift
• Cognito Ball Joint SM Series Upper Control Arm Kit
• Torsion Bar Adjuster Key Kit
• Fox 2.0 Performance Series Monotube Front Shocks
• Fox 2.0 Performance Series Monotube Rear Shocks
• Improves vehicle appearance and reduces nose-down rake
• Improved ball joint angle
• Maintains adequate droop travel to retain ride quality
• Allows for up to a 33 x 12.5-Inch Tire on a 9-inch Wide Wheel with 5-inch backspacing
• 3.5-hour DIY install time
• Made in the USA

The Cognito 3 Inch Performance Leveling Kit contains everything you need to level your truck or SUV with high quality components.

The Cognito 3 Inch Performance Leveling Kit includes the Cognito Ball Joint SM Series Upper Control Arm Kit, Torsion Bar Adjuster Keys, front and rear Fox Performance Series Monotube shocks and front shock spacers to maximize droop travel.

The Cognito Ball Joint SM Series Upper Control Arms feature boxed sheet metal arms that are CNC robot welded and finished with a durable semi-gloss black powder coating. Alloy series ball joints are included as well as new crush sleeves and polyurethane bushings.

The Cognito Ball Joint SM Series Upper Control Arms adds performance to the Chevy and GMC truck by correcting the ball joint angle for lifted and leveled applications, increasing droop travel, and increasing caster slightly for better highway speed drivability. Cognito components are engineered, manufactured and assembled in the USA.

Fox 2.0 Performance Series IFP smooth body shocks contain the latest in shock technology to transform the performance of your Truck or SUV. They use race-proven damping control to provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions. Made in the USA.

Contact us at info@4x4fabworks.com with any questions. 

• Yields 4-inches of front lift
• Cognito Block and U-Bolt Kit yields 2-inches of rear lift
• Fox 2.0 Performance Series IFP Monotube Front and Rear Shocks
• Maintains Adequate Droop Travel for Superior Ride Quality
• Allows for up to a 35x12.5 tire on 9-inch wide wheel with 5-5.75-inch back spacing
• Made in the USA
• 
  

We have bundled everything you need in a lift kit for your Silverado/Sierra 2500/3500 2WD/4WD with high quality Cognito components. There is no guesswork. Cognito components are engineered, manufactured and assembled in the USA.

The Cognito Non-Torsion Bar Drop Front Lift kit is designed and engineered to offer superior ride quality and corrected CV joint angles.

The Fox 2.0 Performance Series shocks contain the latest in shock technology to transform the performance of your truck. The Fox 2.0 Performance Series IFP front shocks are rust resistant and have a metal impact extruded aluminum body to increase cooling capacity.

The IFP eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving. They're easy to install and provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions.

Contact us at info@4x4fabworks.com with any questions. 

The Cognito 2-Inch Block and U-Bolt Kit includes 2-inch tall powder coated semi-gloss black cast steel blocks and heavy-duty zinc plated U-bolts.