Specs:
Front Lift Height | 6.5" |
Rear Lift Height | 5" |
Material | Steel |
Front Lift Method | Replacement Strut |
Rear Lift Method | Cast Blocks |
Lift Type | Lift Kit |
Wheel Size | 20 x 9 |
Back Spacing | 5-5.75" |
Max Tire Size | 35 x 12.5 |
Wheel Size 2 | 18 x 9 |
Back Spacing 2 | 5"-5.25" |
Max Tire Size 2 | 35 x 12.5 |
Wheel Size 3 | 17 x 9 |
Back Spacing 3 | 5" |
Max Tire Size 3 | 35 x 12.5 |
Finish | Powdercoat |
Metal Cutting Required | Yes |
Accommodates Factory Wheels |
See Notes |
Welding Required | Yes |
Features:
Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
FMVSS No.126 compliant to work with your vehicle's stability & traction control systems without lighting up your dash like a Christmas tree.
High-strength, 1/4" steel construction crossmembers and ductile iron steering knuckles to optimize operating angles.
Nitro series full length gas struts improve ride quality and offroad damping.
Multi-point differential relocation brackets and heavy duty skid plate improve CV operating angles and offer added protection
Kits are proudly made in the USA.
Notes:
Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2018. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum.<br>Is your truck a crew cab? Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance.<br>Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference.<br>Fitment: All wheel drive models may require front CV driveshaft. See installation instructions for more information.<br>Fitment: Will NOT fit models equipped with MagneRide magnetic ride control.<br>Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing.<br>Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing